Input control
Part identity, source approval, revision, quantity, incoming status and shortage ownership.
China Box Build Coordination
Coordinate inputs, integration, testing and documented handover under one project-defined China Box Build scope.
Request a quote
Send your drawing, BOM or idea — we reply with a practical Box Build scope review.
We coordinate enclosure, approved PCBAs, internal harnesses, purchased components, electromechanical integration, system testing, labels, records and final packaging as one complete-unit scope. The responsibility matrix states which inputs are customer-supplied, which we coordinate and what remains outside the delivery.

The released BOM, approved-source information, supply responsibility and revision status provide a common baseline across mechanical, electrical, software and packaging inputs. We coordinate their readiness without publishing supplier identities or presenting every upstream asset as our own.
Part identity, source approval, revision, quantity, incoming status and shortage ownership.
Assembly state, configuration, test release, serial identity, records, accessories and packaging.
Review cadence, working language, response owners, drawing and file exchange, ECO handling and deviation approval are agreed for each program. Decisions are recorded against the applicable revision and affected units. Time-zone coordination can be planned, but this page does not promise a universal communication or response schedule.
A controlled NPI and pilot build validates fit, route, assembly sequence, test access, configuration, labels and the customer approval path before repeat production. Open risks and redlines remain visible until they are resolved or accepted by the designated authority.
Incoming, first-unit and in-process checks are selected from product risk and project requirements. Finished-unit testing follows approved procedures and limits. Serial, configuration, test and exception data can be associated and delivered in the agreed format. See quality and traceability.
Packaging specification, destination, Incoterms, logistics, customs documentation and product or trade-compliance responsibilities must be confirmed for each project. We prepare the agreed handover package but do not make a universal claim about export eligibility, duties, taxes or delivery time.
The model may fit products that benefit from coordinated regional inputs and can support clear remote engineering decisions, controlled revisions and an NPI approval loop. The decision should consider product complexity, supply-base fit, total landed cost, communication, intellectual property, regulatory responsibilities and schedule risk. China is not automatically the lowest-cost or lowest-risk answer for every project.
BOM, drawings, enclosure, PCBA, harness, software and supply responsibilities.
Product stage, build quantity, forecast, variants and approval gates.
Inspection criteria, procedures, limits, fixtures, records and acceptance authority.
Delivery country, packaging, marks, documents and proposed Incoterms.
Applicable product, market, customs and trade requirements with responsible parties.
Revision process, contacts, review cadence, file exchange and deviation authority.
Prepare the full RFQ package, review our manufacturing network or see the Box Build process.
What buyers usually ask before sending an RFQ. Price and lead time are always confirmed in the written quotation for your defined scope.
BOM with manufacturer part numbers and approved sources, assembly drawings, enclosure CAD (STEP) or drawings, PCBA identity and interface data, harness drawings or wiring maps, firmware and test procedures, label artwork and packaging instructions.
BOM content and sourcing route, enclosure and tooling needs, assembly and wiring labour, test depth and fixtures, configuration mix, quantity and forecast, packaging and documentation. Pricing is confirmed in the written quotation.
Lead time is confirmed in the quotation after material availability, tooling or fixture needs and any NPI or pilot gate have been reviewed. We do not publish a standard schedule.
T/T bank transfer is preferred. Standard terms are 100% prepayment. Credit card is accepted through PayPal only, with a 4% surcharge. Credit terms are reserved for key accounts with a long-term order plan. Bank details are provided on the proforma invoice (PI).
PCBA: Shenzhen Ao'er IATF 16949 (IATF 0597519), PCB assembly only. Hebei Cloom: IATF 16949 (IATF 0611191) for wire harness production excluding design, ISO 9001 for wire harness manufacturing, ISO 13485 for medical wire harness manufacturing. No certificate covers the complete Box Build.
For a first-round quote, the core set is the current BOM with manufacturer part numbers, assembly and enclosure drawings, PCBA and harness definitions, the test requirement, build quantity or forecast, and the destination with proposed Incoterms. We flag any missing information during RFQ review instead of assuming it. The complete file list is on our Box Build RFQ checklist page.
Price is driven by BOM content and sourcing route, enclosure fabrication and any tooling, assembly and wiring labour, test depth and fixture needs, firmware loading and configuration mix, build quantity and forecast, packaging, labelling and documentation requirements. We do not publish a price list; every price is confirmed in the written quotation for the defined scope.
Lead time depends on material availability, enclosure tooling, fixture preparation, NPI or pilot approval and build quantity, so it is confirmed in the quotation for each project rather than published as a standard figure. Long-lead components and approval gates are identified during RFQ review.
T/T bank transfer is preferred. Standard terms are 100% prepayment before production. Credit card payment is accepted through PayPal only and carries a 4% surcharge. Credit terms are reserved for key accounts with a long-term order plan. Bank details are provided on the proforma invoice (PI), never on this website.
No single certificate covers the complete Box Build; each registration belongs to a named entity and scope. PCBA: Shenzhen Ao'er holds IATF 16949:2016 (IATF 0597519) for PCB assembly only. Cable harness: Hebei Cloom Electronic Technology Co., Ltd. holds IATF 16949:2016 (IATF 0611191) for wire harness production, excluding product design, plus ISO 9001:2015 for wire harness manufacturing and ISO 13485:2016 for medical wire harness manufacturing. Certificate copies are available on request. Product-level approvals for your device remain defined and owned by you.
Yes. Customer-supplied inputs can be included when part identity, revision, quantity, incoming condition, packaging and handling responsibilities are defined in the responsibility matrix. Before the first build, we agree who handles shortages and consigned parts that fail incoming inspection.
Have a BOM, assembly drawings, enclosure CAD, harness requirements or test procedure? Send what you have. We’ll confirm the Box Build scope, identify missing information and outline the next step before quotation.